Washing Machine Loud Noise During Spin

Banging, grinding, or thumping sound during the spin cycle

60%

60% chance this is caused by:

Worn drum bearings or damaged shock absorbers

🔧 The Exact Part You Need

Shock Absorbers (2-pack)

$35

Buy on Amazon →

Drum Bearing Kit

$40

Buy on Amazon →

Total parts cost: $75. Same-day shipping available on most items.

🔨 Tools You'll Need

Socket Set

$35

Amazon →

Multi-Bit Screwdriver

$12

Amazon →

Hard · 1-2 hours

Parts: $75 vs $$600-1,200 to replace

📋 Step-by-Step Instructions

Unplug the machine

Open back panel to access shock absorbers

Check if shocks are leaking or have no resistance — replace if so

If noise persists, check drum bearings by spinning drum by hand

Grinding from back center = bad bearings

Bearing replacement requires disassembling the outer drum

Not comfortable with this repair?

This is rated as a hard repair. If you'd rather have a pro handle it, a service call typically costs $100-200 plus parts. For a major component, it may be worth the peace of mind.

Check what a professional would charge: See repair costs on FixrCost →

Frequently Asked Questions

How much does it cost to fix a washing machine that's loud noise during spin?

The part costs about $35. If you do it yourself, that's your total cost. A professional service call would add $100-200 in labor, bringing the total to $185.

How long does this washing machine repair take?

This repair is rated "hard" and typically takes 1-2 hours. The most time-consuming part is usually accessing the component, not the actual swap.

What if this isn't the problem?

Our diagnosis is 60% likely based on the symptom you described. If replacing this part doesn't fix it, the next most common cause for "banging, grinding, or thumping sound during the spin cycle" would be related to the wiring harness or control board. In that case, consider calling a professional.

Should I just replace my washing machine instead?

A new washing machine costs $600-1,200. If yours is well under 10-13 years old, a $35 repair is far more cost-effective. If it's near end-of-life and has had multiple issues, replacement starts making more sense.